Next: 4. Packages Up: 3. Base configuration Previous: 3.12 imond configuration
If you use connections with dynamic IP address assignment, you need to set IP_DYN_ADDR to `yes', otherwise to `no'. Most Internet providers use dynamic IP address assignment.
Default setting: IP_DYN_ADDR='yes'
fli4l's default dial mode is `auto', i.e. fli4l dials automatically if an IP packet has to be routed to an IP address outside the LAN. However, you may also set the dial mode to `manual' or `off'. In these cases, dialing to establish a connection is only possible using the imonc client or the Web-Interface.
Default setting: DIALMODE='auto'